China Auto Electrode Modern Pipe Car Body Repair Spot Welder Cage Welding Machine

China Auto Electrode Modern Pipe Car Body Repair Spot Welder Cage Welding Machine

Product Description

When the spot welder is working, after the start (foot) switch is pressed, the solenoid valve acts, the compressed air pushes the cylinder to move, and the electrode head presses the workpiece; After the time delay, the power switch (thyristor) in the controller is switched on, and the welding process starts. The welding transformer generates welding current to conduct welding by jointly building and maintaining the selected welding time. After welding, continue to maintain the pressure on the workpiece to melt the core to cool the welding point of the stroke. After that, the solenoid valve reverses, the electrode head is lifted, and a welding cycle is completed.

Technical Parameters

Advantages

(1) . The lowering and rising speed of the pressure head can be adjusted at will, which alleviates the pressure impact on the work and reduces the noise;

(2) The secondary conductor adopts the upper insulation mode, and the insulation performance is stable and reliable;

(3) The main circuit adopts water-cooled high-power silicon controlled rectifier module, with strong, stable and reliable output;

(4) The water circuit elements are all made of copper and stainless steel, and equipped with visual water flow display to display the water flow;

(5) The operation is controlled by foot switch, with high production efficiency and low labor intensity.

Product Structure

Working Environment and Conditions

Air source:the air source uses dry and clean compressed air with a pressure of 0.5-0.6MPa and a stable pressure.

Requirements for power supply network:voltage waveform shall be actual sine wave; the fluctuation of grid voltage shall not exceed ± 10% of the rated value; the fluctuation of power grid voltage frequency shall not exceed ± 1% of the rated value.

Images

Application

Frequently Asked Questions

1. When can you arrange shippment?
The shippment is 15 days after getting deopsit, but customized machines should be more than 25 days.

2.Do you inspect the finished products?
Yes, each step of production products will be came out inspection by QC department before shipping.

3.Are you factory?
Yes, we are factory, all machine is made by ourself and we can provide customize service according to your requirement.

4.How to buy your Spot Welder?
Please send us inquiry to our email, and we will give you a PI to send us payment.

5. How to contact you?
You can send a mail for us and call us.

6.How will you deliver my goods to me?
We always ship by air and sea in the mean time.

7.How about your transport packing? Is it possible to damage the machine during the transportation?
We have rich experience on international transportation. All the packing are extra thickness carton filling with protective PE foam and waterproof membrane. No damage happened during transportation until now.

8.What kind of payment do you accept?
T/T, Western Union, PayPal, .L/C, D/A, etc.